Ras al Khaimah -
United Arab Emirates
Aggregate
| S.No | Test Name | Test Method |
|---|---|---|
| 1 | CLAY LUMPS AND FRIABLE PARTICLES | ASTM C 142 /C 142 M |
| 2 | DETERMINATION OF AGGREGATE CRUSHING VALUE | BS 812:1990 Part 110 |
| 3 | DETERMINATION OF AGGREGATE IMPACT VALUE | BS 812:1990 Part 112 amd 8772 |
| 4 | DETERMINATION OF ELONGATION INDEX OF COARSE AGGREGATES | BS 812:1990 Part 105 section 105.2 |
| 5 | DETERMINATION OF FLAKINESS INDEX OF COARSE AGGREGATES | BS 812:1989 Part 105 section 105.1 |
| 6 | DETERMINATION OF PARTICLE DENSITIES & WATER ABSORPTION | BS 812: Part 2: 1995: Clause 5.3 |
| 7 | DETERMINATION OF PARTICLE DENSITIES & WATER ABSORPTION | BS 812: Part 2: 1995: Clause 5.4 |
| 8 | DETERMINATION OF PARTICLE DENSITIES & WATER ABSORPTION | BS 812: Part 2: 1995: Clause 5.5 |
| 9 | DETERMINATION OF PARTICLE SIZE DISTRIBUTION (WET AND DRY SIEVING) | BS 812: 1985 part 103 section 103.1 test 7.2 &7.3 amd 6003 |
| 10 | DETERMINATION OF PARTICLE SIZE DISTRIBUTION | BS 812 Part 103.1:1985 amd. 6003:89, cl.7.2/7.3 |
| 11 | PARTICLE SIZE DISTRIBUTION | CIRIA SP 83/CUR 154: A 2.1 |
| 12 | DETERMINATION OF SHELL CONTENT IN COARSE AGGREGATE | BS 812:1985 Part 106 |
| 13 | DETERMINATION OF TEN PERCENT FINE VALUE OF AGGREGATES (DRY AND SOAKED) | BS 812:1990 Part 111 Test 7.1 & 7.2 |
| 14 | MATERIAL FINER THAN 75 MICRONS IN MINERAL AGGREGRATES BY WASHING | ASTM C 117 |
| 15 | RESISTANCE TO DEGRADATION OF SMALL OR LARGE SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE | ASTM C 131 & ASTM C 535 |
| 16 | SAND EQUIVALENT VALUE OF FINE AND COARSE AGGREGATES | ASTM D 2419 |
| 17 | SIEVE ANALYSIS OF FINE AND OARSE AGGREGATES | ASTM C 136 |
| 18 | SOUNDNESS OF AGGREGATES BY THE USE OF SODIUM SULFATE OR MAGNESIUM SULFATE | ASTM C 88 |
| 19 | DENSITY, RELATIVE DENSITY (SPECIFIC GRAVITY) AND ABSORPTION OF FINE AGGREGATES | ASTM C 128 |
| 20 | DENSITY, RELATIVE DENSITY (SPECIFIC GRAVITY) AND ABSORPTION OF COARSE AGGREGATES | ASTM C 127 |
| 21 | BULK DENSITY AND VOIDS IN AGGREGATE | ASTM C29/C 29M -97 (2003) |
| 22 | MOISTURE CONTENT | BS 812:PART109 |
| 23 | DETERMINATION OF CONSTANT MASS | - |
| 24 | SHATTER INDEX OF IRON ORE LUMPS,SINTERS AND PELLETS | IS: 9963 |
| 25 | IRON OXIDES: LUMP ORES, SINTER AND PELLETS | IS 649 |
| 26 | SOUNDNESS OF AGGREGATE | BS 812-121 |
| 27 | THERMAL DEGRADATION INDEX (TDI) OF IRON OXIDES, LUMP ORES, SINTER AND PELLETS | IS 10823 |
| 28 | AGGREGATE COMPACTION FRACTION VALUE | RHP-004 |
| 29 | FLAT PARTICLES, ELONGATED PARTICLES OR FLAT AND ELONGATED PARTICLES IN COARSE AGGREGATES | ASTM D 4791 |
| 30 | MATERIAL FINER THAN 75 MICRO METER SIEVE -BS EN | BS EN 933: Part 1 |
| 31 | BULK DENSITY OF AGGREGATE | BS 812 Part 2: 6.3 , 4.1/ 4.2 |
| 32 | PARTICLE DENSITY & WATER ABSORPTION | BS EN 1097-6: |
| 33 | PARTICLE SIZE DISTRIBUTION OF AGGREGATES | BS EN 933-1 |
| 34 | PARTICLE SIZE DISTRIBUTION OF AGGREGATES | BS EN 933-1 |
| 35 | DRYING SHRINKAGE OF AGGREGATE | BS EN 1367-4 |
| 36 | SOUNDNESS OF AGGREGATE | BS EN 1367-2 |
| 37 | SHELLS CONTENTS IN COARSE AGGREGATES | BS EN 933-7 |
| 38 | RESISTANCE OF COARSE AGGREGATE FRAGMENTATION - LOS ANGELES TEST | BS EN 1097-2 |
| 39 | MATERIAL FINER THAN 63 MICRONS | BS EN 933-1: |
| 40 | FLAKINESS INDEX OF AGGREGATE | BS EN 933-3: |
| 41 | DRYING SHRINKAGE OF AGGREGATE | BS 812 – 120: |
| 42 | MATERIALS FINER THAN 75µ SIEVE IN MINERAL AGGREGATES | BS 812-Part 103.1: Cl. 7.2: 1985: Amd. 6003 |
| 43 | CLAY, SILT AND DUST IN FINE OR COARSE AGGREGATE | BS 812-Part 1: CLAUSE 7.2.4: |
| 44 | PARTICLE SHAPE AND SURFACE TEXTURE OF AGGREGATES | BS 812-Part 102: 1989: Appendix C |
| 45 | SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES | AASHTO designation T27-93 / T11-91 |
| 46 | PARTICLE SHAPE - SHAPE INDEX | BS EN 933-4 |
| 47 | SCRATCH HARDNESS OF SURFACE ACCORDING TO MOHS | BS 6431:Part 13 |
| 48 | RESISTANCE TO WEAR MICRO-DEVAL | BS EN 1097-1 |
| 49 | RESISTANCE TO WEAR MICRO-DEVAL | BS EN 1097-1 |
| 50 | RESISTANCE TO FRAGMENTATION BY LOSS ANGELES TEST OF RAILWAY BALLAST | BS EN 1097-2 Clause 5: & BS EN 13450:Annex C |
| 51 | PARTICLE LENGTH OF AGGREGATES FOR RAILWAY BALLAST | BS EN 13450: CLAUSE 6.7: |
| 52 | DETERMINATION OF PARTICLES FINER THAN 500 MICRONS | BS EN 9331, BSEN 13450: Amnd 15337 |
| 53 | SOUNDNESS OF AGGREGATES | AASHTO Designation T104 |
| 54 | CLAY LUMPS AND FRIABLE PARTICLES IN AGGREGATES | AASHTO Designation T112 |
| 55 | DETERMINATION OD PARTICAL SIZE DISTRIDUTION OF AGGEGATE | BS EN 13383-2 |
| 56 | DETERMINATION OF PERCENTAGE OF FULLY CRUSHED PARTICLES IN COARSE AGGREGATE | DMS 7 |
| 57 | DETERMINATION OF PERCENTAGE OF PARTIALLY CRUSHED PARTICLES IN COARSE AGGREGATE | DMS 8 |
| 58 | PARTICLE DENSITY OF FILLER | BS 812:Part2 |
| 59 | POTENTIAL ALKALI REACTIVITY OF AGGREGATE -MORTAR -BAR METHOD | ASTM C 1260 |
| 60 | PERCENTAGE OF CRUSHED BROKEN SURFACES IN COARSE AGGREGATE | BS EN 933 |
| 61 | DETERMINATION OF SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE | AASHTO T 85 |
| 62 | LOS ANGELES TEST | AASHTO T 96 |
| 63 | DETERMINATION OF PROSITY OF AGGREGATE | RHP-018 |
| 64 | DETERMINATION OF DENSITY ,RELATIVE DENSITY AND ABSORPTION OF COARSE AND FINE | ASTM C 127 & 128 |
| 65 | DETREMINATION OF WATER CONTENT BY OVEN DRYING METHOD | BS EN 1097-5 |
| 66 | DETREMINATION OF BASIC FRICTION (STATIC) | USBR 6258 |
| 67 | DETREMINATION OF LOOSE BULK DENSITY AND VOIDS PERCENTAGE IN AGGREGATE | BS EN 1097-3- / BS EN 1097-6 |
| 68 | DETREMINATION OF DECREPIATION /DEGRADATION INDEX OF DLOMITE | IS 10346 : Annex A |
| 69 | DETREMINATION OF DECREPIATION /DEGRADATION INDEX OF LIMESTONE | IS 10346 : Annex A |
